Operating Manual – Folding bike with electric drive up to 250 W
16.07.2021 REV 2.1
20
Avoid burns
C A U T I O N
Risk of burns on hot surfaces!
Bike components (e.g. brakes, wheels, etc.) can get hot while riding. Touching these components can
result in burns.
-
Allow hot components to cool down before working on them or wear heat-resistant protec-
tive gloves.
Avoid injuries to your legs
Injuries to your legs can occur if the pedal spacing (Q-fac-
tor) is too small or too large. There is a risk that riders will
have problems with the crankset installed.
Should riding feel uncomfortable due to the pedal spacing,
seek advice from the manufacturer and have your crankset
changed, if necessary.
Avoid vibrations
Incorrect installation, wear and overloading (e.g. electric motor touching the ground when riding
over bumps or kerbs) or loose parts can cause the electric motor to no longer run smoothly.
-
Use the bike only on approved surfaces.
-
Check the drive unit for backlash-free and smooth running before every trip.
-
If you hear grating or grinding noises or discover obvious signs of
damage, contact a dealer and have the bike repaired. Using the bike on the road or off-road causes
vibrations to be transmitted from the ground to your body.
-
Use the bike only on approved surfaces.
