Zünd L-1200, Руководство по эксплуатации

Страница: 18 / 142

Product description PN series frame version
Layout and function
2-4
110004,001,11-2009, jmu
2
2.5 Layout and function
The cutter is constructed on a stable, welded frame construction.
Upper cutter part The upper cutter part comprises:
– Base frame with table
– Beam with carriage
– Beam drive
– Side covers with operating unit
The beam is driven by a DC-servo motor. The patented drive system:
– Has superb precision, reliability and durability (low maintenance)
– Consists of a slip-free steel band drive with torsion shaft and with hardened and
ground linear guides.
The robust beam is designed to accept all tool systems available. Beam and tool
head are monitored by a safety shut-down system consisting of light barriers and sa
-
fety trip switches.
The carriage is part of the beam and is used for carrying the tool heads. A central
locking screw enables quick and trouble-free head exchange.
The carriage drive is integrated into the beam and comprises:
– A servo-controlled DC motor
– A slip-free steel band drive
The standard tabletop is made from easy-care plastic. In practical use, it is a proven
solution with low noise emission and it protects the tools. The material to be pro
-
cessed is put on the table and held down by vacuum.
Principle for fixing the material:
Small holes in the vacuum plate are connected to a vacuum pump via air ducts. The
suction area of the table can be adjusted and controlled depending on the application
and material feeding system.
The two side covers encase the beam drive.
The control panel:
– Is integrated into a side cover
– Consists of an LCD display and keypad
– Enables user-friendly input of settings and menu commands