Zünd L-1200, Руководство по эксплуатации

Страница: 110 / 142

Cleaning and maintenance PN series frame version
Safe maintenance of the machine
6-2
110010,001,11-2009, jmu
6
6.2 Safe maintenance of the machine
General safety instructions
•
Servicing and repair work must be carried out by trained specialist personnel.
• For periodic checks/inspections you must comply with the mandatory intervals or
the intervals specified in the instruction manual. Equipment appropriate to the
task must be available in order to carry out maintenance tasks.
• The maintenance schedule specifies precisely who is to carry out which jobs.
The jobs listed as daily/weekly tasks may be carried out by operating personnel
after appropriate training.
• You must ensure that spare parts meet the technical requirements laid down by
the manufacturer. Original spare parts are always guaranteed to do so.
• The wearing of protective clothing (see "Personal protective equipment, clothing"
in "Safety") is obligatory during maintenance and cleaning work.
• Keep unauthorised personnel well away from the machine during maintenance
work.
• If possible, clearly attach a "DO NOT SWITCH ON" sign to the machine's main
control panel during maintenance and cleaning work.
• Express approval must be obtained before carrying out welding or grinding work
on the machine.
• Safety data sheets of the resources used can be found on the Zünd homepage.
• General safety instructions on handling chemicals can be found in the section
"Safety", "Handling and storage of chemicals"