Commissioning the field level
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
103
Notes
•
Settings are only saved if
SAVE
is selected.
•
Selecting
SAVE
automatically saves all values displayed on the touchscreen.
•
To switch to the
START SCENE
settings level directly (without saving), select
NEXT STEP
.
Setting the stop time
Figure 161:
STOP TIME
settings level
–
Start point:
STOP TIME
settings level
9. Select
HOUR
.
=
HOUR
illuminates.
10. Run your finger along the touchring until the desired number appears.
11. Select
MINUTE
.
=
MINUTE
illuminates.
12. Run your finger along the touchring until the desired number appears.
13. Select
SAVE
to save the settings.
=
The message
SAVED
briefly appears.
=
Scene sequence stop time is saved.
=
STOP PROCESS
settings level appears.
Notes
•
Settings are only saved if
SAVE
is selected.
•
Selecting
SAVE
automatically saves all values displayed on the touchscreen.
•
To switch to the
START SCENE
settings level directly (without saving), select
NEXT STEP
.
Parameter
Value range
HOUR
0 – 23
MINUTE
0 – 59
Table 58:
START TIME
setting options
Parameter
Value range
HOUR
0 – 23
MINUTE
0 – 59
Table 59:
STOP TIME
setting options
Содержание LUXMATE CIRIA
Страница 1: ...LUXMATE CIRIA Instructions for start up and use ...
Страница 2: ......
Страница 139: ......
Страница 142: ...www zumtobel com ciria LUXMATE CIRIA Instructions for start up and use ...