Zumex Group S.A.
Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected].
Zumex Service
Tel: +34 960 800 999.
www.zumex.com
Cleaning instructions
Take off the feeder
basket
.
Remove the stainless-steel
peel guides
.
Turn the knobs and take off the
front cover
as well as the side outputs.
Remove the
Pressing Kit
by pulling it
towards you with the stainless-steel hand-
les.
Remove the waste trolleys from the base
to empty them.
Take off the
feeder plate
by unscrewing the
central knob.
Press the side tabs to remove the
bin
.
Take off the
automatic PulpOut System
, by
lifting the assembly with the part closest to
you.
Remove the
blade
by pressing on the centre
and pulling the handle towards you.
Caution!
Be careful not to cut yourself.
Clean inside the
base
with a soft sponge.
Insert the cleaning brush into the
Drain&Clean
hole in the base of the feeder, removing any
residue that you may find in the tube.
Unscrew the central knob of the
Pressing
Unit
.
Remove the
2Services tap
by easily un-
screwing it.
Clean the
front
part of the machine with a
soft sponge.
Once all the parts have been disassembled,
proceed to deep clean the machine.
The cleaning process will be explained in details for each one of the machine’s components below.
Caution!
For a correct cleaning process, please follow the instructions
below. Before getting started, make sure that the machine is nplugged
from mains power.
!
1
7
4
10
13
2
8
5
11
14
3
9
6
12
15
