9
3.1 Assembly of base
(1) Please take out the base support from the package, lay it on the ground.
(2)Take out the pole, place the pole on the base, and after fixing the cable then secure the 4
screws.
(3) Place the plastic cover on the metal base
3.2 Assembly of the first arm
Take out the first arm
，
please pay attention, the star handler fixation screw [3] must be
tightened in advance, insert the hole to the axis, then use jump ring pliers to fix the two
axis with jump ring in the circle groove, put on the cover.
ATTENTION: the second arm uses a balancing spring. The knob [3] can only be
tightened but not locked, therefore it is advisable to loosen the screw with the Allen
key that is under the cap of the knob itself only with the arm inserted on the pole
and the head mounted.
Fig.8 Assembly of base
