56
ZIP2 User’s Manual
Important
Press the Save CODEC Configuration button to save the configured values to the
phone. Settings do not take effect until you power cycle the phone or execute a
Reset command (see section A.2.16 on page 59).
A.2.10.1
CODECS
These parameters configure the ZIP2 audio CODECs. The packetization and silence suppression
parameters should be set to support the SIP server audio settings and capabilities.
A.2.10.2
Jitter Buffer
Jitter buffers compensate for network jitter at the receiving interface by buffering incoming
packets and preparing them for playout.
A.2.10.3
Paging Support
Paging support options allow the ZIP2 to play page announcements sent from the Paging server.
To enable paging on the phone, select the Enable Paging Support parameter, enter the IP address
or FQDN of the paging server, the paging port, and the codec used by the paging server in the
appropriate data entry boxes.
A.2.11
Security
The Set Security Password panel protects the Download and Configuration Utility from access by
unauthorized users. To access this panel, select System from the main menu and Security from the
secondary menu.
To select a new password, enter the name of the new password in both data entry boxes. Leaving
both boxes blank removes the password protection from the utility.
Figure A-9
VoIP VLAN Configuration panel
Содержание ZIP2
