126 / 128
Identification: MD-AL-GI-00
Rev. 1.0 of 21/07/2021 - Application: GID
User’s Manual 1PH 3000TLM-6000TLM-V3
Rev. 1.0 21/07/2021
By entering the credentials: username = admin and password = admin, you can change the configuration
from dynamic to static by selecting the network window (see
blue arrow
) and then the “STATIC” option (see
green arrow
).
To complete the operation, click “Apply” (see
red arrow
).
10.4.9.
Local monitoring
The datalogger makes it possible to obtain an additional monitoring system (
local monitoring
), which can
be used locally on a web page (therefore, also without an internet connection) and accessed from any device
present in the same local network as the datalogger.
10.4.9.1.
Requirements for installation of local monitoring
In order to install the local monitoring system on the datalogger, the customer must ensure that:
The datalogger is connected to the local network and to the internet (the internet connection is only
required during installation and configuration of the local monitoring system).
A static address (to be provided by the customer) with gateway and subnet mask is available for viewing
the page locally.
