136 / 138
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
User’s Manual 3PH 50000TL-60000TL-V1
Rev. 1.1 15/03/2021
10.4.8.2.
Network configuration
At the time of purchase, the Datalogger is configured in DHCP, i.e. dynamic configuration.
However, if you want to set up a static configuration for your Datalogger, you can access the internet page
via the link RMSxxxxxxxx: 8888, as shown in the figure (e.g. RMS00000007).
By entering the credentials: username = admin and password = admin, you can change the configuration
from dynamic to static by selecting the network window (see
blue arrow
) and then the “STATIC” option (see
green arrow
).
To complete the operation, click “Apply” (see
red arrow
).
