Chapter 2 Hardware Descriptions
à
PA reversed power (standing wave ratio) detection function:
when the
temperature threshold standing of the wave radio is exceeded, the TR reports
the relevant alarm and controls the PA through the PA output enable/disable
signal.
à
PA temperature detection function: When the temperature threshold is exceeded,
the TR reports the relevant alarm and controls the PA through the PA output
enable/disable signal.
à
PA output enable/disable
à
TR transmit output power detection
à
FL two-channel
alarm detection and report
à
DC Power input undervoltage/overvoltage alarm detection and report
à
DC Power output undervoltage/overvoltage alarm detection and report
à
DC Power output overcurrent alarm detection and report
à
System environment monitoring
à
CPRI self-test alarm
à
Key chip self-test alarm
2.2.4 Power Amplifier (PA)
The Power Amplifier (PA) module performs the following functions:
l
Amplifies downlink RF signal input via the
and then sends the signal to the FL.
l
Provides digital pre-distortion feedback signals for the TR.
l
Provides a PA output enable/disable interface.
2.2.5 Power
The DC Power module converts -48V DC input power supply to DC power supply required
by the
,
, or
modules.
2.3 External Cables
2.3.1 DC Power Cable
The 4-core cable is used as DC power cable in ZXSDR R8860 . It is made according to
the on-site survey requirement.
One end of the cable is soldered with a straight round connector while the other end is
bare, with a label indicating signal definition.
shows the structure of the DC power cable.
2-5
SJ-20100722143906-001|08/30/2010
ZTE Proprietary and Confidential
Содержание ZXSDR R8860
Страница 4: ...II ...
Страница 6: ...II ...
Страница 8: ...II ...
Страница 58: ...Tables This page intentionally left blank ...