Zte ZXR10 GER, Руководство пользователя

Страница: 275 / 412

Chapter 16 BGP Configuration
Confidential and Proprietary Information of ZTE CORPORATION 253
ZXR10_R4(config)#access-list 1 permit 172.16.10.0 0.0.0.255
ZXR10_R4(config)#route-map torouter1 deny 10
ZXR10_R4(config-route-map)#match ip address 1
ZXR10_R4(config)#route-map torouter1 permit 20
Configuration of R1:
ZXR10_R1(config)#router bgp 1
ZXR10_R1(config-router)#no synchronization
ZXR10_R1(config-router)#neighbor 172.16.1.2 remote-as 1
ZXR10_R1(config-router)#neighbor 172.16.1.2 next-hop-self
ZXR10_R1(config-router)#neighbor 172.16.20.1 remote-as 2
Configuration of R2:
ZXR10_R2(config)#ip route 183.16.0.0 255.255.0.0 fei_1/4
ZXR10_R2(config)#router bgp 1
ZXR10_R2(config-router)#neighbor 172.16.1.1 remote-as 1
ZXR10_R2(config-router)#neighbor 172.16.1.1 next-hop-self
ZXR10_R2(config-router)#neighbor 183.16.20.2 remote-as 3
ZXR10_R2(config-router)#neighbor 183.16.20.2 ebgp-multihop 2
ZXR10_R2(config-router)#neighbor 183.16.20.2 route-map
torouter5 in
ZXR10_R2(config)#access-list 1 permit 155.16.10.0 0.0.0.255
ZXR10_R2(config)#route-map torouter5 deny 10
ZXR10_R2(config-route-map)#match ip address 1
ZXR10_R2(config)#route-map torouter5 permit 20
Configuration of R5:
ZXR10_R5(config)#ip route 173.16.0.0 255.255.0.0 gei_1/1
ZXR10_R5(config)#router bgp 3
ZXR10_R5(config-router)#neighbor 173.16.20.2 remote-as 1
ZXR10_R5(config-router)#neighbor 173.16.20.2 ebgp-multihop
2
BGP Maintenance & Diagnosis
If a BGP route problem occurs, related debugging commands
can be used to help fault location and troubleshooting. The show
commands are used more frequently. The show commands can
be used to view the current status of a BGP neighbor and the
BGP routing information learned by a router.
Refer to below procedure for BGP maintenance and diagnosis on
ZTE ZXR10 GER.
„
Router Command Line Interface has been accessed.
„
BGP is running on a network.
Introduction
Purpose
Prerequisites