Zte ZXHN H2640, Руководство по управлению техническим обслуживанием

Страница: 45 / 116

4 Configure the Internet
SJ-20200714160642-002 | 2020-07-27(R1.0) 4-19
Parameter Description
Destination MAC Address Destination host MAC address.
802.1p Specify the 802.1p value to modify the service priority.
VLAN ID Identifies a VLAN. Range: 0
–4094. To ensure normal service
operation, the VLAN ID must be the same as that set in upper-
layer configuration.
Level 2 Protocol The level 2 protocol includes: Unconcerned, IPv4, IPv6, ARP and
PPPoE .
Source IP Source host IP address.
Destination IP Destination host IP address.
DSCP DSCP value.
Level 3 Protocol The Level 3 Protocol includes: Unconcerned, TCP , UDP and
ICMP .
Source Port Source port number of the matching packets.
Destination Port Destination port number of the matching packets.
TCP ACK Set radiobox On to enable the function of TCP ACK.
Packets Classification Result
802.1p Re-marking 802.1p identifier value.
DSCP Re-marking DSCP identifier.
Queue Priority Range:1-8.
3. Click Apply button to apply the changes.
4.4 Configure the Security
4.4.1 Configure the Firewall Level
The section describes how to configure firewall level.
Configuring the Firewall
1. On the main page of the ZXHN H2640, select Internet > Security > Firewall to the
Firewall page, see Figure 4-15 .
Steps
Abstract