background image

Chapter 2  Overview 

The ZXDSL 831/831B/831II/831BII is an ADSL access device that allows 
multiple line transmission modes. The equipment provides a 10/100Base-T 
Ethernet interface in a local LAN device. Through the high-speed ADSL 
access service, the ZXDSL 831/831B/831II/831BII can provide the broadband 
Internet service or enterprise network access service for users.   

This device complies with part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) This    device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including  interference that may cause undesired operation.       

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment.   

Note: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of 
the following measures: 

—Reorient or relocate the receiving antenna. 

—Increase the separation between the equipment and receiver. 

—Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 

—Consult the dealer or an experienced radio/TV technician for help. 

Содержание ZXDSL 831B























Отзывы: