18
Waking Up Your Spro
Your Spro automatically goes into sleep mode when it is not in
use for certain time. The touch screen is turned off to save power
and the keys are locked to prevent accidental operations.
You can wake up your Spro by following the instruction as below.
1. Press the
Power Key
or touch the
Sleep/Wake Up Key
to
turn the screen on.
2. Touch and hold
on the screen.
NOTE:
If you have set an unlock pattern, a PIN or a password for your
Spro (see
Personalizing – Protecting Your Spro With Screen
), you’ll need to draw the pattern, or enter the
PIN/password to unlock your Spro.
Turning On/Off the Projector
You can use the projector embedded in your Spro to project the
display onto large surfaces.
Touch the
Projection Key
to toggle the projector on or off.
