FSAP 9800 Technical Manual
�
Traffic convergence function
To implement the traffic convergence function, the large-ca-
pacity DSLAM is plugged-in with a GPNC card in downlink
mode.
�
Subscriber card function
DSLAM is plugged-in with a GPNC card and connected to the
terminal modem, implementing FTTH.
The GPON access module supports the following functions:
�
VLAN
�
802.3ah MPCP
�
MAC address forwarding table management
�
Data encryption
�
Multicast service
�
QoS
�
STP
Environment
Monitoring Module
The FSAP 9800 environment monitoring module consists of the
following:
�
Power monitor unit
�
Power distribution monitor unit
�
Fan monitor unit
FSAP 9800 connects to
environment monitor module through
the environment monitoring serial port on the main control card.
When the monitor parameters are unusual, the monitor module
automatically reports alarms to the device, enhancing the man-
agement and maintenance of the device. Users can set the alarm
upper/lower threshold of some environment parameters in
mode or NM mode. The device gives the parameter to the moni-
tor unit and the monitoring unit determines whether to create an
alarm upon the alarm upper/lower threshold.
Broadband
Operation and
Maintenance
Module
The FSAP 9800 broadband operation and maintenance module im-
plements functions such as online test, SELT/DELT test, and ADSL
modem remote management.
Broadband Access Services
This topic includes the following:
�
ADSL Service
�
ADSL2/2+ Service
�
VDSL2 Service
�
SHDSL Service
�
Ethernet Service
�
PON Service
32
Confidential and Proprietary Information of ZTE CORPORATION