background image

 

40

2

You are in the place 

where no CDMA 
network covered , such 
as underground parking 
lot, tunnel etc. 

2. Move to the place that 
has good signal. 

 

1. You have not installed 
the USB modem 
properly. 

1. Run the installation 
program first, then insert 
the modem. If you use 
the WinXP operating 
system, install the 
drivers according to the 
Windows indication 
information to operate. 

2. The modem isn’t 
inserted well. 

2. Restart the computer, 
or insert the modem 
again.  

When the USB 
modem has been 
plugged in, computer 
cannot find the visual 
disc of the USB 
modem. 

 

3. The UIM card isn’t 
inserted well, such as 
inserted in reverse. 

3.Insert the UIM card 
correctly again. 

 

1. The SMS center 
number isn’t correct. 

1. Consulting with the 
service provider, 
configure the right 
number. 

Message sent failed. 

 

2. The network is busy 
and other reasons. 

2. Try later.   

 

Date connection 
failed. 

1. You are in the 

place where no CDMA 
network covered

 such 

as underground parking 
lot, tunnel etc. 

1. Move to the place that 
has good signal. 

 

Содержание AC570











































Отзывы: