1
Getting Started
Preparation
Inside the box, please find
1) PTZ Camera
2) Power supply and power cord
3) Remote control
WARNING: Don’t move or rotate the camera by seizing the camera head.
You also need
1) Two AAA alkaline battery for the remote control
2) Video monitor with HDMI input, or SDI input
3) RJ45 LAN cable.
4) PC or Laptop.
Connection
Connect HDMI output as the diagram to video monitor. If you are
professional and has SDI monitor, you can also try connect SDI
output to the video monitor instead.
Power on
Connect the power supply or you can use Lan cable
(802.3at
）
connect the PoE switcher, press the power switch at the back of the
camera. Instantly, you will see the camera starts rotate to its default
parking position of front middle.
Now, you will see crystal and beautiful video pictures on the
monitor.
Note:
If no video picture, please
1) Check power supply. Make sure the front LED turn on.
2) Check cable connection and make sure the input video source of the
monitor is set correctly.
Control the Camera by Remoter
Put two AAA batteries inside the remote control. Point to the front
of the PTZ camera. Use the four arrow buttons to control the pan
and tilt. Press HOME always park the camera at the front middle
anytime.
Press ZOOM +/- to change far/near.
Press MENU to set up the camera. For detail camera control by
remote control, please refer to chapter 4.5 of the
ENGLISH
