Web Control User Interface Setting
21
3.4.5 USB 4G Dongle
Using USB 4G dongle, push and slide the cover to the end direction of dongle to open the dongle cover. Locate
the SIM card slot. It holds Standard SIM card. Insert the SIM card into the corresponding card slots. If your SIM
card is Nano card, you will need a Nano to standard SIM card adapter. Face the SIM card metal contact side down,
and replace the dongle cover and slide it into place.
Then, insert the USB dongle into one of your computer ports. The computer identifies the new hardware and
starts installation automatically.
When the installation is complete. The USB dongle web management page is displayed and the USB dongle
connects to the network automatically if correct APN is set.
If the computer does not start the USB dongle installation automatically, find the AutoRun.exe file in the USB
dongle root directory, and double-lick the file to run it. Access
to check the device status.
When you use the Dongle at the first time, user name and password may need be set. Then go to Settings->Dial-
up->Profile Management.
