Zoom X5V Скачать руководство пользователя

Страница: 27 / 87

Chapter 1: Installation Instructions

Using Your X5v with Xbox

Live

No special settings are required to use Xbox Live. If you are using
PPP encapsulation, just be sure to enter the login DSL User Name
and Password supplied by your provider on the X5v’s Basic Setup

page. Once installation is complete, follow these steps.

Update the Xbox Dashboard: Make sure you have your

Xbox Live Starter Kit at hand. Insert the Xbox Live CD into

your Xbox. Once the upgrade is complete, the main menu will
include an Xbox Live entry.

Connect the X5v and the Xbox: Using an Ethernet cable,

plug one end into the Xbox’s jack and the other end into one

of the X5v’s Ethernet (LAN) jacks. Note: If you didn’t use the

Ethernet cable that came in your X5v package to connect the

X5v to your computer, you can use that cable. Otherwise, you
can buy one at your local electronics or computer store. Insert

the Xbox Communicator module into the Xbox Controller

expansion slot (top slot) and then insert the headset plug into

the Communicator module.

Activate your Xbox Live account: The Xbox Live CD
should still be in your Xbox. We recommend that you watch a

video that explains the installation process: Select Xbox Live

from the menu. Then, from the Dashboard, select Xbox Live

and follow the prompts. Note: You will need your

subscription code to activate your account—this number is

located on the CD’s sleeve. (If you require more detailed
instructions, please refer to your Xbox Live documentation.)

That’s it! You can load one of the demo games included on your

Xbox Live CD or use any other Xbox Live-enabled game to begin.

Now please turn to Section 1.8 Front Panel Description on page
29.

Using Your X5v with PlayStation

Your PlayStation 2 must be connected to your X5v: Using an
Ethernet cable, plug one end into the PlayStation’s Network jack

and the other end into one of the X5v’s Ethernet (LAN) jacks.

Note: If you didn’t use the Ethernet cable that came in your X5v
package to connect the X5v to your computer, you can use that

Содержание X5V
























































































Результаты поиска

Содержание X5V

Отзывы:

Похожие инструкции для X5V

Бренды по названию

Популярные бренды

Zoom X5V, Руководство пользователя

Результаты поиска

Содержание X5V

Отзывы:

Похожие инструкции для X5V

Бренды по названию

Популярные бренды