Zoom LiveTrak L-12 Скачать руководство пользователя страница 71

Страница: 71 / 100

Audio files

The

creates the following types of audio files according to the recording channel.

•

Channels 1–8: mono WAV files

•

Channels 9/10, 11/12 and MASTER: stereo WAV files

The file format depends on the sampling rate (

→

Changing the sampling rate

) and quantization bit depth (

→

Changing the recording format

) used by the unit.

The

can also play back audio files created using DAW software (

→

Importing audio files from USB

flash drives

NOTE

• The names given to audio files depend on their channels.

Channels 1–8: TRACK01–TRACK08
Channels 9/10, 11/12: TRACK09_10, TRACK11_12
MASTER: MASTER

• If the file size exceeds 2GB during recording, a new file will be created automatically in the same proj-

ect and recording will continue without pause. When this happens, numbers will be added to the ends
of the file names: “-01”, “-02” and so on.

Deleting audio files

Audio files that are not needed can be deleted.

MENU button

REC button

Selection

encoder

Select MENU > PROJECT > FILE DELETE.

Содержание LiveTrak L-12





































































































Результаты поиска

Содержание LiveTrak L-12

Отзывы:

Похожие инструкции для LiveTrak L-12

Бренды по названию

Популярные бренды

Zoom LiveTrak L-12, Руководство по эксплуатации

Результаты поиска

Содержание LiveTrak L-12

Отзывы:

Похожие инструкции для LiveTrak L-12

Бренды по названию

Популярные бренды