Zoom F8n, Руководство по эксплуатации

Страница: 108 / 198

Output set
tings
S
et
ting signals sent to headphones (Headphone R
outing)
108
1.
Press .
2.
Use to select
OUTPUT
,
and press .
3.
Use to select
Headphone
,
and press .
4.
Use to select
Headphone
Routing
, and press .
5.
Use and to
select the setting you want
to change.
NOTE
• You can also press + to open the Headphone Routing
screen.
• You can edit and save up to 10 signal settings.
• Settings are saved automatically.
▶ Continue to one of the following procedures.
Setting the routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.109
Using mono headphone output. . . . . . . . . . . . . . . . . . . . P.110
Monitoring mid-side stereo signals. . . . . . . . . . . . . . . . . P.110
You can set the type of signal sent to the headphone output to either prefader or postfader for each track.
You can also save 10 setting combinations (Setting 1 – Setting 10).
Setting signals sent to headphones (Headphone Routing)