manualshive.com logo in svg

Zoom F6, Руководство по эксплуатации, Страница: 77 / 199

Поделиться
Скачать
Zoom F6 Скачать руководство пользователя страница 77

77

Monitoring the input signals of specified tracks

1.

 Press   when the Home Screen is open.

The PFL screen for the track that was last opened opens, and the 
status indicator lights orange.
Only the input sound of the track show can be monitored through 
headphones.

Level meter 

(pre-fader input 

signal level) 

  

Parameter name

Parameter

Explanation

Source

This sets the input source.

Trim

This sets the input level.

HPF/Limiter

This sets the high pass filter and limiter.

Phase/Delay

This sets the phase reversal and delay.

Pan

This sets the panning.

Monitor

This sets the monitoring volume on the PFL screen.

NOTE

This does not change the signals output from line outputs.

HINT

•

• Use   and   to select parameters and change setting values.

•

• When the cursor is on the topmost track number, press   to show the 

next track.

2.

 Press  .

This opens the Home Screen.

The input signals of specified tracks can be monitored.
Even tracks that have not been set to record can be input to the PFL screen and their input sounds monitored.
This is convenient when using tracks as return inputs.
Carious settings can be made for selected tracks.

Содержание F6








































































































































































































Отзывы:

Нет отзывов