Zoom F6 Скачать руководство пользователя страница 13

Страница: 13 / 199

Preparations

Supplying power

Power can be supplied three ways using AA batteries, an L battery or USB.

■

Using an L battery

Slide the battery in the direction of the arrow while

pressing it toward the recorder.

NOTE

•

• Be careful because the battery case could become loose unexpectedly if

the battery compartment cover screw is not tightened firmly.

•

• Use only one type of batteries (alkaline, NiMH or lithium) at a time.

•

• After loading AA batteries, set "Power Source" to the correct type of bat-

tery. (

→

P. 20)

•

• If the remaining battery power indicator becomes red, turn the power off

immediately and install new batteries.

■

Using AA batteries

Loosen the screw in the battery cover on the bottom.

Open the battery compartment cover on the bottom,

remove the battery case, and insert 4 AA batteries.

Put the case into the compartment.

Close the battery cover and tighten the screw.

Содержание F6








































































































































































































Результаты поиска

Содержание F6

Отзывы:

Zoom F6, Руководство по эксплуатации, Страница: 13 / 199

Результаты поиска

Содержание F6

Отзывы: