Applying delay to input signals
If there are differences in the timing of input signal sounds, use this function to correct them when
recording.
1.
Press
for the input to set.
(→
Selecting inputs for making settings
)
This opens the Input Settings Screen.
2.
Use
/
to select “Delay” and press
to confirm.
3.
Use
/
to set the delay time and press
to confirm.
NOTE
:
If the sample rate is 192 kHz, delay will be disabled.
(→
)
HINT:
This can be set from 0.0 ms to 30.0 ms.
38
