84
Setting the audio input and
effect send levels
When a signal is being input through the AUDIO
INPUT jack, set the input level and the amount
sent to the master effect.
1.
While pressing
F
,
press
0
-16.
This opens the input setting screen.
2.
Turn
!
in the SOUND area to
change the input level.
This can be set from 0 to 100.
3.
Turn
"
in the SOUND area to
change the send level.
This can be set from 0 to 100.
Setting the clock mode
Set whether the internal clock or an external
clock is used when connected to other MIDI
devices by USB.
1.
While pressing
F
,
press
0
-30.
External clock is selected when
0
-30
is lit.
NOTE
•
When external clock is selected, songs
cannot be recorded.
•
When the CLOCK MODE is set to INTER-
NAL, it will function in the following ways.
- The
A
will constantly output MIDI
clock from its USB port.
- The
A
will send a start message when
playback starts and a stop message when it
stops.
- It will send a continue message when play-
back resumes from a paused state.
- Start, stop and continue messages will not
be output, however, when the
A
does
not play back because, for example, it does
not have a song sequence.
System settings
Changing various settings
System settings
Changing various settings
