61
Real-time input
1.
Press
R
.
This starts the count.
2.
CONTROLLER
Tap a pad to select
a pattern to play.
The tapped pad will light according to the
pattern animation type setting (
→
P. 66).
HINT
•
If no animation has been set, the tapped pad
will blink.
•
If even a single animation has been set, the
tapped pad will show the animation, and it
will light with the pattern color.
3.
CONTROLLER
Play other pads to
switch patterns.
HINT
•
The timing of pattern changes depends on
the quantize setting (
→
P. 66).
•
A maximum of 64 pattern changes can be
recorded. Pattern changes over this amount
will not be recorded.
4.
Press
S
when done playing all
patterns.
This ends song creation.
Preparations
■
Enter the mode
1.
Press
Z
.
■
Selecting songs
Select a song to input.
1.
Turn
H
in the SEQUENCE area
to select a song.
Press
y
to create a new song
immediately.
Assigning patterns to pads
1.
CONTROLLER
Tap a pad to select
it for pattern assignment.
The pattern assigned to the selected pad
is shown on the display and starts play-
ing back.
HINT
Tap a pad while pressing
Z
to select a
pad without playing the pattern.
2.
In the SOUND area, press
h
,
turn
H
to open the pattern
selection screen, and turn
!
to
change the pattern.
This assigns that pattern to the pad.
SONG mode
Cr
eating songs
Creating songs
