32
5.
To clear an input step, tap that
0
again.
The step will be cleared and the LED will
become unlit.
NOTE
This method can be used when playing back
and when stopped.
Pattern input
■
Select an instrument and input a
pattern
1.
Press
B
or
b
to select
the bars to input.
2.
CONTROLLER
Press the pad for
the instrument to be input.
The SEQUENCE display will appear as
shown below. The velocity that the pad is
tapped will be recorded in the step.
3.
To change the length of the sound
input, turn
H
in the SEQUENCE
area.
4.
While pressing the pad from step
2, press
0
for the step to input.
The LED for the tapped key will light red.
1
15
2
16
3…
PA
TTERN mode
Patter
n step input
Pattern step input
