background image

ADSL Half-Bridge Modem
Quick Start

Your ADSL half-bridge modem comes with a power cube, Ethernet cable, phone

cord, ADSL micro-filter, and software CD.

To complete the installation, you need the following:

 

An ADSL-enabled telephone wall jack 

to plug the half-bridge modem

into.

 

A Windows XP/2000/Me/98 computer 

that has an Ethernet port. This is

used to install the modem’s software and to configure the modem.

When the installation is complete, the half-bridge modem will connect to an

ADSL-enabled phone jack and to a Windows computer or router.

Installing the Modem Software

1

11

1

 

Do not plug the modem into your computer or router. You need to install

the software first.

2

22

2

 

Turn on your Windows computer.

3

33

3

 

Insert the supplied CD into the CD drive of your computer. The CD should

start automatically and the 

Language Selection

 screen should appear. Select

your language. (If the CD does not start automatically, on the desktop, click

the 

Start 

button, click 

Run

, and then type 

D:\setup.exe

, where 

D

 is the

letter of your CD drive.)

4

44

4

 

From the 

Main Menu

, click 

Installation Wizard 

then

 ADSL Half-Bridge

Modem

. The software installation will begin. Follow the prompts.

5

55

5

 

When the installation is complete, click 

Finish

 then click

 Exit

.

6

66

6

 

Remove the CD from your CD drive then shut down the computer.

Congratulations!

 You have installed the software. Continue with 

Installing the

Hardware

.

Installing the Hardware

1

11

1

 

Shut down your computer.

2

22

2

 

Plug the included ADSL micro-filter into an ADSL-enabled phone jack.
Then plug the modem’s phone cord from the modem’s 

ADSL 

jack to the

modem jack of the micro-filter. If you’d like you can plug a phone into the

PHONE

 jack of the micro-filter.

3

33

3

 

Plug one end of the supplied Ethernet cable into the modem’s

ETHERNET

 port and plug the other end into your computer’s Ethernet

port.

4

44

4

 

Plug the modem’s power cube into (

PWR

) jack and the other end into a

“live” power strip or wall outlet.

5

55

5

 

Turn the modem on with its 

ON/OFF

 button. The 

PWR

 light on the front

panel of the modem will become solid, and the 

LINK

 light will blink once.

6

66

6

 

Turn the computer on.

Congratulations!

 You have installed the hardware. Now continue with 

Getting

Connected

.

Содержание ADSL X2









Отзывы: