Zontes ZT310M 2022, Руководство по обслуживанию

Страница: 45 / 88

Part information
Serial Name Number Serial Name Number
1 M12 × one point two five × 35 hexagon
flange bolt (grade 10.9 / environmental
color) 1 13 φ 14.5 × φ 25 × 16 driven wheel
bushing
1
2 φ 12.3 × φ 40 × 4 washer 1 14 ZT1P72MN Driven wheel clutch
housing 1
3 ZT1P72MN Driving wheel drive plate 1 15 Driven wheel clutch shoe 5
4 ZT1P72MN Distance cylinder 1 16 Driven wheel sliding disc 1
ZT1P72MN V-belt 1 17 Driven wheel fixing plate 1
6 ZT1P72MN Driving wheel sliding disc 1 18 Left crankcase cover gasket 1
7 ZT1P72MN Pulley 8 19 Φ 10 × 14 hollow dowel 2
8 ZT1P72MN Slope plate 1 20 M6 × 16 hexagon flange bolt 1
9 ZT1P72MN Boot block 4 21 Bearing pressure plate of left
crankcase cover 1
10 φ 23.2× φ 40 × 3.25 washer 1 22 6005
－
2rd / p5c3 deep groove
ball bearing
1
11 M14 × 1 hexagon flange nut (Grade 10 /
environmental color zinc) 1 23 ZT1P72MN left crankcase cover 1
12 Φ21.8 × φ 1.8 acrylate rubber O-ring 2 24 M6 × 30 hexagon flange bolt 12
Two, Maintenance information
General information
1. This section describes the repair and maintenance of the drive sprocket and driven gear.
2. The maintenance of driving wheel and driven wheel can be carried out on the whole vehicle without dismantling the
engine separately.
3. During maintenance, the driving wheel, driven wheel and V-shaped drive belt shall not touch oil or grease to prevent
the V-shaped drive belt from slipping.
Torque value
Serial Name Number Torque
（
N·m
）
Remark
1 M14 × 1.0 hexagon flange nut (Grade 10 /
environmental color zinc) 1 75±7 N.m
-
2 M12 × 1.25 × 35 hexagon flange bolt (grade
10.9 / environmental color) 1 103±10 N.m
-
3 M6 × 30 hexagon flange bolt 12 12±1.5 N.m
-
4 M6 × 16 hexagon flange bolt 1 12±1.5 N.m Thread glue to be applied
Tools
1. Torque wrench;
2, 17# and 19# sleeves;
（
Extended sleeve recommended
） ；
3. Special fixing fixture for driving and driven wheels;
4. Elastic clip;
5. T-shaped sleeve -8#;
6. Hexagon socket -4#;