Zontes ZT125-M 2022, Руководство по обслуживанию

Страница: 41 / 218

41 / 218
Swell nail description
①Press down the center cylinder with 4# inner hexagon or other tools, you can hear a sound or the center cylinder moves
axially by 2mm;
②Pry open the gap with a blade, nail or carving knife, etc. and remove it; if space permits, you can reach it Push out from t he
back;
③Pinch the outer ring with two fingers, and push the center cylinder up to the initial pos ition;
④Pinch the center cylinder with two fingers to install the swell nails to the installation position;
⑤The outer ring is attached to the connected parts; if not attached Check whether it is misaligned;
⑥Press the center cylinder with your fingers or other tools, and you can hear a sound or the top of the center cylinder is almost
flush with the top surface of the outer ring, indicating that the assembly is in place.
Hoop clamp Internal Circlip Pliers External circlip pliers Clamp multimeter
Multimeter Dust blow gun M350 replace the oil filter
Some of the above pictures are from the Internet, and the copyright belongs to the author of the original picture. Do not
use it for other purposes.