ZSI-330 User Manual
Issue 01
Page 6 of 30
Features
Camera switching
The ZSI-330 supports 16 video inputs and 1 video output. The video output is shared between a single local
operator (if present) and the remote operator.
The ZSI-330 can be configured to run a sequence.
Alarm handling
The ZSI-330 supports local alarm events which can be used trigger a range of functions:
•
Dialling a remote control room – to report the alarm remotely
•
Reporting the alarm to a keyboard – to report the alarm locally
•
Energising a local relay
•
Sending a local camera to a preset
It can take as an alarm source either its own contact alarm inputs or alarm inputs via a ZoneVu receiver (or
supported 3
rd
party dome – see ZSI-EFD support document).
Auxiliary Outputs
The ZSI-330 supports auxiliary relay outputs which can be mapped to a range of ZoneVu commands. They
can also be controlled via alarm events.
EFD support
The ZSI-330 supports Meyertech extensive range of 3
rd
party EFDs (embedded firmware drivers) on the
ZVR port. Contact Meyertech Sales for details of EFD support.
Security
The ZSI-330 supports a PIN code which prevents access to the site by all but authorised equipment.
I/O Operation
Relay Function
The ZoneVu function used to control the specified relay
Contact Inputs
The trigger state of the contact inputs – normally open or normally closed.
MEYERTECH LIMITED
Z
S
I
-
3
3
0
