7
Wall Mount Installation
ZSR9104WE comes with an antenna base which can be mounted onto the wall.
When installing the antenna base on a wall, the mounting kit must be first installed
onto the wall.
1.
Determine the optimal location for the antenna base before beginning.
2.
Mark 2 holes 10cm apart from each other by pencil and drill the holes
into the wall.
Note:
Ensure you are using the 3mm (1.8 inch) drill bit size and type for the
wall.
3.
Hammer the included anchors into the wall until seated flush.
4.
Drive the included screws into the anchors until leaving approx. 5mm
screw exposed.
Leave Approx. 5mm
All manuals and user guides at all-guides.com
all-guides.com
