1
GWY005451 6TL
Transmitter
1.
Transmitter components introduction
2.
Transmitter standard and parameters
1)The frequency bandwidth: ISM 2.4GHz (2.400~2.480GHz)
2)number of controller is 6CH
3)The operation current is not greater than 150 mA (include LCD screen);The charging current is not
greater than 500mA.
4)The battery is Li-Polymer battery (3.7V), the volume is 780 mAh
1)
2)
3)
4)
5)
6)
7)
The transmitter is using 2.4G ISM frequency channel, allow auto detection while using the transmitter.
The transmitter receive or distribute the frequency by ID identify technology, protect external jamming,
provide stable and reliable during the operation.
The LCD setting module is dividable, user-friendly and setting the trim easily.
Interchanging interface easily (Change Mode + Menu setting)
Trainer connector is using wireless technology
The power button is using soft material to become the button, it is durable and change the connection
defect while pushing the roller power button
The transmitter is based on the ergonomic technology to design the transmitter
3.
Product Features
Antenna
Power button
LCD setting module
Mode 3 / Mode 4 aileron trim
Mode 1 /Mode 3 elevator trim
Mode 2 / Mode 4 throttle trim
Mode3 elevator and aileron stick
Mode4 throttle and aileron stick
Mix / Hold
Aileron D/R
Aux 1
Trainer/Bind
Gear
3D switch (Mode 2/ Mode 4)
Elevator D/R
Flap Gyro
Tail Blade pitch (Mode 1/ Mode 3)
3D switch (Mode 1/ Mode 3);
Tail Blade pitch (Mode2 /Mode 4)
Mode1 elevator and rudder stick
Mode2 throttle and rudder stick
Mode 1 / Mode 2 rudder trim
Mode3 throttle and rudder stick
Mode4 elevator and rudder stick
Mode1 throttle and aileron stick
Mode2 elevator and aileron stick
Mode 1 /Mode 3 throttle trim
Mode 2 / Mode 4 elevator trim
Mode 3 / Mode 4 rudder trim
Mode 1 / Mode 2 aileron trim