background image

FCC Warning: 

This device complies with part 15 of the FCC Rules. Operation is subject to 
the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 

Any Changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate the 
equipment.

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 

-Reorient or relocate the receiving antenna. 

-Increase the separation between the equipment and receiver. 

-Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected. 

-Consult the dealer or an experienced radio/TV technician for help. 

The device has been evaluated to meet general RF exposure requirement. 
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. 
Device types Remote Controller with model ESKY00808

5

 (FCC ID: 2AVDQ-

ESKY00808

5

) has also been tested against this SAR limit. The highest 

reported SAR values for Max.SAR is 0.03W/kg. This device was tested for 
typical body operations with the back of the handset kept 0mm from the body. 
The use of accessories that do not satisfy these requirements may not comply 
with FCC RF exposure requirements, and should be avoided. 

Отзывы: