9
figure below.
When cleaning the water tank and ice bucket of the ice maker, you can directly flush
them with a water pipe. To prevent water from entering the internal circuit and causing
electric leakage, do not use excessive water pressure, and do not directly flush the part
above the ice lattice.
When ice maker is not used for a long time, in addition to turning off the water source and
cutting off the power supply, open the water drain cap to drain water completely out from
the water tank.
After using your ice maker for a long time, we also suggest you should clean your ice
maker.
Especially to the ice lattice and the water tank, it must be cleaned periodically.
TROUBLE SHOOTING
If the ice maker is stopped by voltage and water pressure unstable, and no ice making or no
ice falling. Please unplug the power supply and wait for 5 minutes before powering on it.
Sometime ice will appear in the water tank. At this time, you can unplug the power supply and
wait for 10 minutes before powering on.