Appendix A. System Checklist
AutoPulse NXT User Guide
61
Appendix A. System Checklist
To perform the checklist:
1.
Install the band. See “Installing the band” on page
2.
Make sure that a fully charged battery is installed in the platform.
3.
Turn on the platform.
•
All indicators on the display momentarily illuminate. The Power, Stop, and Battery charge status
indicators remain illuminated.
4.
Check the indicators.
•
The battery charge indicator should have four bars. If not, replace with a fully charged battery.
•
If the band guard lock indicator is on, check if the band guards are correctly installed on the
platform.
•
If the alert indicator is on, see Appendix
. If the alert indicator
can
-
not be resolved, contact "Technical Support" (page
Date
Battery Serial Numbers
Primary
Spare
Содержание AutoPulse NXT
