ZOLL AutoPulse NXT, Руководство пользователя, Страница: 46 / 85

Chapter 7. Using the System
AutoPulse NXT User Guide 4 1
To temporarily interrupt the platform’s active operation, press the Stop button (Figure 3.2, “User control
panel,” on page 10). To restart the platform, press the Start button (Figure 3.2, “User control panel,” on
page
( 10).
1. Press Stop twice.
2. Remove the band from the patient.
3. Turn off the platform.
Preparing for next use
To prepare the system for next use:
1. Remove the band from the platform. See “Removing the band” on page 19.
2. Remove the battery.
3. Clean the battery. See “Cleaning the battery” on page 5 6 .
4. Charge the battery. See “Charging the battery” on page 30 .
5. Clean the platform. See “Cleaning the platform” on page 5 6 .
6. Install a new band. See “Installing the band” on page 16.
7. Insert a fully charged battery.
The battery charge status should display four bars. If not, replace the battery with a fully charged battery
before use.
A utoPulse NXT Performance Report
A session is considered the time from when the platform turns on to when it turns off. A performance
report s ummary file provides data from the session. The performance report file an be downloaded from
the platform to a FAT-32 formatted USB drive and view in PDF format.
The AutoPulse NXT Performance Report files include:
• Summary date. Date the summary was generated
• Product version
• Platform serial number
• Battery serial number
• Power on time. Time the platform was turned on
• Session start time. Time compressions started
• Session stop time. Time compressions ended
• Duration in minutes. Session duration in minutes
• Ventilation mode. 30:2 or Continuous
• Ventilation scheme. 30:2 regardless of compression mode
• Compression rate. Compressions per minute (cpm)
• Compression count. Number of compressions performed during the session
• Compression fraction. Percent of session time spent performing compressions
• Number of pauses. Number of time compressions were stopped during the session
• Status Code. Reason for any alerts
Ending treatment
To end treatment:
• Events. Time and description of events that trigger an alert