18 in.
10 in.
1-1/2-in
Discharge
pipe
Check valve
3/16-in
Vent hole
GFCI outlet
Basin cover
Fill with
water
1. Place pump in a sump basin that is at least
10 in. wide and 18 in. deep.
2. Install rigid 1-1/2 in. discharge pipe, union,
check valve according to code.
3. Drill a 3/16 in. hole in the discharge pipe,
level with the top of pump. Connect remaining
discharge pipe into main discharge line.
4. Connect pump power supply to a
GFCI-protected receptacle.
5. Fill the basin with water to check operation.
Install a basin cover and gasket on top of
the basin.
SW1140Q A
QUICK REFERENCE GUIDE.
SEE INSTRUCTION MANUAL
FOR COMPLETE DETAILS.
WARNING:
FOR YOUR PROTECTION, ALWAYS DISCONNECT
PUMP FROM POWER SOURCE BEFORE HANDLING.
SUBMERSIBLE
SUMP PUMP
MODEL #1073Q, 1075Q
Zoeller
®
is a registered trademark of Zoeller Co. All Rights Reserved.
ZoellerAtHome.com
