Zoef Robot SR806W SJAAN, Руководство пользователя

Страница: 10 / 19

8
Product Operation
1. Battery charging
A. Positioning the charging station:
Place the charging station against the wall and
remove obstacles 1 meter on either side and about
2 meters front of the charging station, as shown in
the image.
B. To charge, make sure the
“ON/OFF” switch on the side of the robot is switched to “ON”.
C. Charge the robot in one of the two ways as shown below:
a. Plug the adapter into the robot and the other end to the power socket as shown in
Fig.a.
b. Press
” ” on robot or “HOME” on remote control to operate the robot to go
charging station for recharging as shown in Fig.b.
Note:
a. When robot is charging, LED panel will gradually show
“11:11”, from left to right.
b. Once charging is completed, LED panel will show
“11:11”.
c. In the standby status, the robot will broadcast voice
“please charge” when battery power is
low.
d. In the working status, the robot will return to charging station automatically when battery
power is low.
To ensure optimum battery performance:
a. Before first use, charge the robot for 12 hours.
b. Charge the robot as soon as battery power is low.
c. The robot will return to charging station automatically when it has finished cleaning or if
battery power is low.
d. If the robot is not to be used for a long time, fully charge the battery, turn the power switch
off, remove and store it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn
the power switch off, remove and store it in a cool, dry place.