4.2 Activating the Vibrator mode
a. Press the
MENU
button 9 times; “1” flashes on the LCD screen.
b. Press the
UP
or
DOWN
button to activate the vibrator function.
c. Press the
PTT
button to confirm your setting.
Note: Vibrator and Call tone can be activated at the same.
4.3 Setting the Roger Beep
The Roger beep is a tone which is automatically transmitted whenever the PTT button is released. This
alerts the receiving party to inform that you have intentionally ended the transmission, and you are now in
receive mode.
a. Press the
MENU
button
10 times, the “ON” icon is blinking on the LCD screen.
b. Press the
UP
or
DOWN
button to select the Roger beep On/Off.
c. Press the
PTT
button to confirm your setting.
4.4 Setting the Key Tone ON or OFF
This feature allows the ZD-360 to emit a confirmation tone after pressing each button.
a. Press the
MENU
button 11 times, the “ON” icon is blinking on the LCD screen.
b. Press the
UP
or
DOWN
button to select the Key tone On/Off.
c. Press the
PTT
button to confirm your setting.
4.5 Setting the Dual Watch Mode
Your ZD-360 is capable of monitoring two channels, the current and another (dual watch) channel. If the
unit detects a signal on either channel, it will stop and receive the signal.
a. Press the
MENU
button 12 times, “
DCM
” icon will be displayed while “OFF” flashes on the
LCD screen.
b. Press the
UP
or
DOWN
button to select the Dual Watch channel (1-8, except the current
channel).
c. Continue pressing the
MENU
button to change the CTCSS code.
d. Press the
UP
or
DOWN
button to select the desired CTCSS code (1-38)
e. Continue pressing the
MENU
button to change the DCS code.
f. Press the
UP
or
DOWN
button to select the desired DCS code (1-83)
g. Press the
PTT
button to confirm your setting.
4.6 Setting the Room monitor
Your ZD-360 is capable of monitoring what happenings on the room. This is most like applicable for baby
room monitoring. It can be activated through VOX function.
a. Press the
MENU
button 13 times, the “
RM”
icon will be
displayed while the “OFF” icon is blinking on
the LCD screen.
b. Press the
UP
or
DOWN
button to select the Room monitor to On/Off.
c. Press the
PTT
button to confirm your setting
