Zodiac eXO Series, Руководство по установке, Страница: 23 / 28

Page 23
Page 22
eXO
®
| Installation Manual
8.6.4 Variable Speed Programming
1. Press .
2. Use to select “Programming”
then press .
3. Use to select “Filter Pump” then press .
4. Use to select “Timer Speed (1-4)”
then press .
5. Use to select the hour for the filtration on
time then press .
6. Use to select the minutes for the filtration
on time then press .
7. Use to select the hour for the filtration off
time then press .
8. Use to select the minutes for the filtration
off time then press .
9. Press to exit.
< -PROGRAMMING
-LOW MODE
-SLAVE MODE
MAIN MENU
< -FILTER PUMP
-SWC
-AUX/LIGHTS
PROGRAMMING
< -TIMER SPEED 1
-TIMER SPEED 2
-TIMER SPEED 3
-TIMER SPEED 4
FILTRATION TIMER
< -RPM 1 ON
-RPM 1 OFF 12:30
04:30
FILTRATION TIMER
10. When a filtration program has been confirmed
the letter “P” is displayed on the top right of
the screen.
23:04 ON P
Variable speed filtration timers 1 and 2 are linked
to the SWC programs. Once validated, these
programmed times are also set as SWC timers 1
and 2.
8.6.5 Salt Water Chlorinator (SWC)
Programming
If a filtration program has been set, the chlorination
program will be identical to the filtration program(s)
by default. They can be changed, however the
chlorination program(s) cannot be activated outside
of the filtration Program(s) for safety reasons.
1. Press
.
2. Use to select “Programming”
then press .
3. Use to select “SWC” then press .
4. Use to select “SWC Timer 1” or “SWC
Timer 2” then press .
5. Use to select the hour for the SWC on
time then press .
6. Use to select the minutes for the SWC
on time then press .
7. Use to select the hour for the SWC off
time then press .
8. Use to select the minutes for the SWC
off time then press .
9. Press to exit.
< -PROGRAMMING
-LOW MODE
-SLAVE MODE
MAIN MENU
<
-RESET TIMERS
-SWC
-AUX/LIGHTS
PROGRAMMING
<
-SWC TIMER 2
-=FILTER PUMP
-SWC TIMER 1
SWC TIMER
<
SWC TIMER
-SWC1 ON
-SWC 1 OFF 12:30
04:30
The “T” symbol is displayed in the upper right hand
corner of the LCD display on the home screen if
the programming is valid.
The “P” symbol is displayed in the upper right-hand
corner of the LCD display on the home screen if a
valid filter pump and chlorinator program has been set.
23:04 ON T 23:04 ON P
8.6.6 AUX/Lights Programming
1. Press .
2. Use to select “Programming”
then press .
3. Use to select “AUX/Lights” then press .
4. Use to select “AUX 1 Timer” or “AUX 2
Timer” then press .
5. Use to select the hour for the AUX on
time then press .
6. Use to select the minutes for the AUX on
time then press .
7. Use to select the hour for the AUX off
time then press .
8. Use to select the minutes for the AUX off
time then press .
9. Press to exit.
< -AUX/LIGHTS
-PROGRAMMING
-LOW MODE
-SLAVE MODE
-REVERSING
-HELP MENU
-LANGUAGE
MAIN MENU
<
AUX/LIGHTS
-ASSIGN LIGHTS
-AUX 2
-AUX 1
<
AUX 2
-OFF
-ON
-SET TIMERS
<
AUX TIMER
-AUX 2 ON
-AUX 2 OFF 12:30
04:30