Page 29 / 47
Edition 3
E
N
G
L
I
S
H
CHARGING THE HIGH-VOLTAGE BATTERY
VI- CHARGING THE HIGH-VOLTAGE BATTERY
An adapter cord 16A/250V Schuko/CEE and a shore power cable 16A/250V are supplied with the
boat.
NOTE
: see Torqeedo’s user Manual, chapter
Charging the high-voltage battery
.
1
2
3
Place the Emergency stop
switch (2) in the RUN position
Connect the shore power
cable into the shore socket.
Set the shore circuit breaker to
position ON
The charging process starts automatically.
TOP-UP THE CHARGE OF THE HIGH-VOLTAGE BATTERY AFTER EVERY TRIP.
WARNING!!!
DANGER OF FIRE AND BURNS FROM OVERHEATING OR FROM HOT
SURFACES ON THE COMPONENTS.
FIRE AND HOT SURFACES CAN RESULT IN DEATH OR SEVERE PHYSICAL
INJURIES.
-
DO NOT STORE FLAMMABLE OBJECTS IN THE AREA OF THE HIGH-VOLTAGE
EQUIPMENT.
-
IF THE SYSTEM BECOMES VERY HOT OR YOU SEE STEAM OR SMOKE,
SWITCH THE SYSTEM OFF IMMEDIATELY.
-
DURING OR IMMEDIATELY AFTER A TRIP, DO NOT TOUCH ANY OF THE
MOTOR OR BATTERY COMPONENTS.
-
PREVENT STRONG MECHANICAL FORCES FROM WORKING ON THE
BATTERIES AND CABLES OF THE SYSTEM.
WARNING!!!
USE ONLY CHARGING CABLES SUPPLY BY AVON.
ALWAYS UNROLL THE CABLES COMPLETELY.
1
Содержание eJET 450
Страница 14: ...Page 14 47 DESCRIPTION Handling...
Страница 34: ...Page 34 47 INSTALLATION AND CIRCUIT Electricity 22 26 27 25 20 19 21 23 24 25 28 29 9 30 31 34 33 32...
Страница 45: ...Page 45 47 Edition 3 E N G L I S H LABELLING VIII 1 POSITION OF STICKERS 8 8 7 3 4 5 6 1...
Страница 46: ...Page 46 47 LABELLING VIII 2 DESCRIPTION OF LABELS 8 7...