![background image](http://html1.mh-extra.com/html/zodiac/ejet-450/ejet-450_manual_4003933025.webp)
Page 25 / 47
Edition 3
E
N
G
L
I
S
H
INSPECTION BEFORE USE - Electricity
IV-8 ELECTRICITY
Check that the navigation lights and fan operate.
For the bilge pump, set the switch to automatic position, place your finger over the sensor (1) for
several seconds to check the pump is activated correctly. Clean the intake strainer if necessary (2).
IV-9 PROPULSION
Carefully check the maintenance hydrojet hatch
to make sure that there is no seaweed, debris or other
foreign objects that could slow down the hydrojet shaft rotation and then the boat speed.
DANGER!!!
BEFORE TRYING TO REMOVE SEAWEED OR OTHER DEBRIS FROM THE
HYDROJET HATCH OR PROPULSION, STOP THE ENGINE, SWITCH THE
SYSTEM OFF AND TURN OFF THE BATTERY SWITCH.
IV-10 EXTINGUISHER
A portable fire extinguisher must be effectively on board and filled up.
Refer to the fire extinguisher manufacturer's instructions to check its condition correctly.
1
2
1
Содержание eJET 450
Страница 14: ...Page 14 47 DESCRIPTION Handling...
Страница 34: ...Page 34 47 INSTALLATION AND CIRCUIT Electricity 22 26 27 25 20 19 21 23 24 25 28 29 9 30 31 34 33 32...
Страница 45: ...Page 45 47 Edition 3 E N G L I S H LABELLING VIII 1 POSITION OF STICKERS 8 8 7 3 4 5 6 1...
Страница 46: ...Page 46 47 LABELLING VIII 2 DESCRIPTION OF LABELS 8 7...