Zmotion VPLC710 Series, Руководство по оборудованию

Страница: 11 / 34

VPLC710 Motion Controller Hardware Manual V1.0
Controller Period 1ms by default
Support SERVO_PERIOD to check
and adjust period
VR Save Size when
Power Off
2048
Ferroelectric memory stores power
failure data for about 10 years
heat-dissipating
method
Cooling fin /
Storage
Temperature
/ -40
℃
-80
℃
Work Temperature / -20
℃
-60
℃
Work Humidity / 10% ~ 95% (non-condensation)
Volume 178mm*186mm*69mm About 2.277dm^3
Weight 2KG /
1.5.2. Config Parameter Specification
Turn on MotionRT software, it can configure parameters specification according to
requirements, please see below image, it shows default parameters, behind indicates
supported parameters range, after configurated, click (
确认
) to save.