Product Manual - ZMORPH i500
5
1. Introduction
Manual guide
This manual describes the basic information about Zmorph i500, safety precautions, preparation for oper-
ations and basic maintenance. Read this manual guide carefully and understandably before operating the
device for the first time. Ignorance of the instructions may result in damage to the device, personal injury or
reduced quality of the printed parts. Make sure that everyone who uses the device has read and followed
these instructions. The manufacturer of the equipment makes every effort to ensure that the safety of use,
transport, storage and disposal is at the highest level. However, the manufacturer has no direct control over
the user and the use of the device, therefore he is not liable for injury, damage and costs resulting from
non-compliance with these instructions.
2. Health and safety at work
2.1 Markings contained in the instructions
guide and on the device
Zmorph i500 nameplate
Zmorph S.A.
ul. A. Ostrowskiego 9
53-238 Wrocław, Poland
Name:
Zmorph
i500
3D Printer
Type/model:
Zmorph i500
Produced:
2021 in EU
Serial number:
Voltage:
110-240V AC, 50-60Hz
Max power output:
1050W
Weight netto:
60kg
1000/i500
Protective Earth (PE) terminal - An earth connection is essential before connecting to the
supply.
Zmorph S.A.
ul. A. Ostrowskiego 9
53-238 Wrocław, Poland
Name:
Zmorph
i500
3D Printer
Type/model:
Zmorph i500
Produced:
2021 in EU
Serial number:
TEST/i500
Voltage:
110-240V AC, 50-60Hz
Max power output:
1050W
Weight
netto:
60kg
This manual contains warnings and safety information for your ZMorph i500 product. The manual also
indicates situations to which special attention should be paid, and warnings about misuse or neglect of the
device.
