Zmorph i500, Руководство пользователя

Страница: 21 / 69

Product Manual - ZMORPH i500 back to table of content >>
21
Machine specification
8.3 Components
Software
Air filtration parameters
Other
Software Own dedicated software
Supported formats STL, OBJ
Output filter type HEPA/Carbon
Input filter type G4 (anti-dust)
Ventilation power 3.1 [W]
Filter dimensions 80 x 80 x 25 [mm]
Fitration control Temperature
Toolhead changing system Nozzle Lifting System
Nozzle Waste Remover Brass brushes and Teflon scrapers
Filament loading Automatic Filament Loading System
End of material detection Filament s RFID tags**
X axis
Y axis
Y axis
Y axis
X axis
single toothed-belt system driven by a stepper
motor and linear rail as guiding element.
Used for movement of Zmorph Dual Drive
Dual Extruder in X-axis. Must be periodically
lubricated to ensure a long life of the machine.
dual toothed-belt system driven by a stepper
motor and linear rails as guiding elements.
Used for movement of Zmorph Dual Drive
Dual Extruder in Y-axis. Must be periodically
lubricated to ensure a long life of the machine.