5
2. INSTALLATION
2.1 Safety Clearance
The minimum clearance to the wall shall be larger than 30cm in order to
ensure proper ventilation.
In the event the ambient temperature is high, it’s recommended to increase
the distance of safety clearance to improve the heat dissipation.
2.2 Mounting Inverter on the Wall
The inverter is designed to either be placed on horizontal surface or be
mounted on the wall with various ways (as shown below). When mounting
the inverter on the wall,
1)
The wall shall be solid and strong enough to carry the inverter;
2)
The location of installation shall allow the user to read the LCD easily;
3)
Two screws shall be firstly fixed on the wall (distance as shown below) so
that the inverter can be hung on the screws,
recommended screw size is
M4*50~65mm.
4)
After mounting the inverter, make sure it’s firmly mounted and won’t
easily fall off in the event of unexpected earthquake or vibration.
