11
Using th
e Cooktop
OPERATION
USING YOUR COOKTOP - RCIND-30 / RCIND-36
After powering on, the buzzer will beep once and all the indicators light up for 1 second then
go out, indicating the cooktop has entered standby mode.
Touch the power ON/OFF
switch, all the indicators show “—“.
Place a suitable pan on the cooking zone that you wish to use. Make sure the bottom of the pan
and the surface of the cooking zone are clean and dry.
Select a heat setting by touching the “—” “+” control.
• If you don’t choose a heat setting within 1 minute, the
cooktop will automatically switch off.
• You can modify the heat setting at any time during cooking.
Power down
Power up
WHEN YOU HAVE FINISHED COOKING - RCIND-30 / RCIND-36
Power down
Power up
Turn the single heating zone off by touching the “-”
control and make sure the display shows”0”.
Turn the whole cooktop off by touching the power ON/
OFF control.
Beware of hot surfaces
An “H" in the display means the cooking zone is too hot to touch. It
will disappear when the surface has cooled to a safe temperature.
It can also be used as an energy saving function. If you want to
heat other pans, use the hotplate that is still hot.
