23
• Service life of the product will extend and frequently encountered problems will decrease
if the product is cleaned periodically.
• Never use gasoline, benzene or similar substances for cleaning purposes.
• Never use any sharp abrasive instruments, soap, household cleaners, detergent or wax
polish for cleaning.
• Dissolve one teaspoon of baking soda in half liter of water. Soak a cloth in the solution
and wring it thoroughly. Wipe the interior of the refrigerator with this cloth and the dry
thoroughly.
• Make sure that no water enters the lamp housing or other electrical parts.
• If you will not use the refrigerator for a long time, unplug it, remove all food inside, clean
it and leave the door ajar.
• Check regularly that the door gaskets are clean. If not, clean them.
• Take out all items in the product to remove the door and body shelves.
• Remove the door shelves by pulling them up. Slide the shelves downwards to re-install
them after cleaning.
• Never use chloric cleaning agents or water to clean outer surfaces or chrome-coated
parts of the product. Chlorine causes abrasion on such metal surfaces.
Avoiding Bad Odors
• Materials that may cause odor are not used in the production of our refrigerators.
However, odor may be emitted if foods are stored improperly or if the inner surface
of the product is not cleaned as required. Please consider the following to avoid this
problem:
• It is important that the refrigerator is kept clean.
• Food residuals, stains, etc. can cause odor.
• For this reason, clean your refrigerator with baking soda every 15 days. Never use
detergents or soap.
• Keep your foods in closed containers. Microorganisms emitted from containers without a
cover may cause unpleasant odors.
• Never keep expired or spoiled foods in your refrigerator.
Protecting the Plastic Surfaces
• Do not put liquid oils or oil-cooked meals in your refrigerator in unsealed containers as
they damage the plastic surfaces of your refrigerator.
• If oil is spilled or smeared onto the plastic surfaces, clean and rinse the relevant part of
the surface with warm water immediately.
WARNING
Switch off the product before cleaning.
WARNING
It is recommended to clean the condenser every six months using
gloves. You must not use vacuum cleaners.
Cleaning the Inner Surface
• To clean the inner surfaces and all removable parts, wash them with a mild solution
comprising soap, water and carbonate.
• Rinse and dry thoroughly.
• Prevent the water from contacting the lighting means and control panel.
Stainless Steel Outer Surfaces
• Use a stainless steel cleaning agent that is non- abrasive and apply it with a lint-free, soft
cloth.
• For polishing, wipe the surface softly with a damp microfiber cloth and use dry wash-
leather.
• Always follow the strands of the stainless steel.
ATTENTION
Do not use vinegar, rubbing alcohol or other alcohol-based
cleaning agents on any of the inner surfaces.
23
Car
e and Cleaning
24
Car
e and Cleaning
CARE AND CLEANING
CARE AND CLEANING
