Zline ISLAND, Инструкция по эксплуатации

Страница: 36 / 43

28
28
Troublesh
ooting
Where are ZLINE products manufactured?
All ZLINE products are manufactured in ZLINE facilities overseas, including:
Germany, Italy, and China.
Are ZLINE range hoods considered type 1 or type 2?
Type 1 - Range hoods that are used with appliances that produce grease and smoke.
Are ZLINE products meant for residential or commercial use?
Residential use.
Why is my range hood white?
This is a protective layer that is placed on all of our range hoods to prevent shipping
damage. This should be easy removable by peeling it off.
Why are my range hood baffle filters blue?
This is a protective layer that is placed on our baffle filters to prevent shipping
damage. This should be easy removable by peeling it off.
What size hood should I choose for CFM purposes?
1. You must determine the output of the cooktop burners of your range; this is
measured in British Thermal Units (BTUs).
2. You should provide 100 CFM of airflow per linear foot of range. To determine
this, divide the BTU rating of your range by 100. This will give you the rating
of the Cubic Feet per Minute (CFM’s) rating needed of your range hood. For
example: If your range is 35,000 BTUs, your range hood should have a rating of
350 CFM’s or greater.
3. To determine the size of the range hood for satisfactory capture, it is
recommended to go at least one size larger than your range, about 3˝ to 6˝
wider. At minimum, it should be the same size of your range. The range hood
width should cover 100% of the back burners and 50% of the front burners.
4. The height of your range hood should be between 30˝ to 36˝ above your
cooktop. Example: 60,000 BTU’s = 600CFM’s
TROUBLESHOOTING